A CDE Definition
The interface used between network terminator 2 (NT2) and an ISDN terminal adapter. This is an internal interface as NT2 is typically built into the terminal adapter. See ISDN.
(Integrated Services Digital Network) An international standard for switched, digital dial-up telephone service for voice and data. Analog telephones and fax machines are used over ISDN lines, but their signals are converted into digital by the ISDN terminal adapter (see below).
Although announced in the early 1980s, it took more than a decade before ISDN became widely available. It enjoyed a surge of growth in the early days of the Internet, because it provided the only higher-speed alternative to analog modems in many areas. Still working in many behind-the-scenes applications, ISDN is rarely used for Internet access today.
ISDN uses 64 Kbps "B" (bearer) channels to carry voice and data. A separate "D" (delta) channel is used for control. The D channel signals the carrier's voice switch to make calls, put them on hold and activate features such as conference calling and call forwarding. It also receives caller ID data. Because the D channel connects directly to the telephone system's SS7 signaling network, ISDN calls are dialed much faster than regular telephone calls.
Basic Service (BRI)
ISDN BRI (Basic Rate Interface) uses one wire pair to carry two 64 Kbps B channels and one 16 Kbps D channel (2B+D). Both B channels are often "bonded" into one, providing a total data rate of 128 Kbps.
Higher Capacity (PRI)
ISDN PRI (Primary Rate Interface) uses four wire pairs to provide 23 B channels and one 64 Kbps D channel (23B+D). A PRI line is equivalent to a 24-channel T1 line. Bonding channels is common; for example, six channels provide 384 Kbps for high-quality videoconferencing. In Europe, PRI includes 30 B channels and one D channel, equivalent to an E1 line. See SS7 and T1.
Connecting to ISDNISDN requires a network terminator (NT1) and terminal adapter (TA). The NT1 plugs into the two-wire line from the telephone company and provides four-wire output to the terminal adapter. In the U.S., the NT1 and TA are typically combined in one unit, but are separate in Europe and Japan.
The terminal adapter is called an "ISDN modem" if it has a built-in analog modem to hook up regular telephones and fax machines. If the ISP supports the Multilink PPP (MLPPP) protocol, the TA can bond channels for faster Internet access.
The Terminal Adapter
Typical SOHO Installation
Typical LAN Installation
Before/After Your Search Term
Terms By Topic
Click any of the following categories for a list of fundamental terms.